Cranking but no start
#11
Glad you got it figured out.
Word of advice next time when checking fuel pressure. Do not test the fuel pressure while cranking.
Test it, key in the on position, engine off. It will prime the pump and get it up to pressure. Check that initial pressure and it should be 60-62 +/- a couple PSI and should remain at or above 55psi for 5 minutes
Word of advice next time when checking fuel pressure. Do not test the fuel pressure while cranking.
Test it, key in the on position, engine off. It will prime the pump and get it up to pressure. Check that initial pressure and it should be 60-62 +/- a couple PSI and should remain at or above 55psi for 5 minutes
Thread
Thread Starter
Forum
Replies
Last Post
Martin13
2nd Generation S-series (1995-2005) Tech
4
11-15-2013 07:32 AM
wvboy18
Engine & Transmission
1
08-29-2012 09:38 AM
Freise
2nd Generation S-series (1995-2005) Tech
2
03-16-2012 11:27 PM
trishharris
2nd Generation S-series (1995-2005) Tech
1
08-04-2010 10:38 AM
apekim
General Tech Help
8
06-30-2006 10:38 AM