1st Generation S-series (1983-1994) Tech Discuss 1st generation S-series (1983-1994) general tech topics here.

Dead Miss at Cold Start

Thread Tools
 
Search this Thread
 
  #1  
Old 09-14-2014, 11:06 PM
BlueWorld's Avatar
Beginning Member
Thread Starter
Join Date: Jun 2014
Location: Seattle, Washington
Posts: 13
BlueWorld is on a distinguished road
Default Dead Miss at Cold Start

When I do a cold start in the morning to go to work/school it feels like I have a dead miss. I don't sit there and idle too long; but it deffinately runs rough. The lurching goes away after about 5 seconds of some moderate throttle though.

Feels like a dead miss to me..
I've done plugs, rotor, cap, and wires. No unusual conditions in any beforehand.
 
  #2  
Old 09-21-2014, 04:27 PM
boscoedoodle's Avatar
Beginning Member
Join Date: Oct 2009
Location: n.west alabama
Posts: 34
boscoedoodle is on a distinguished road
Default

I replaced dist cap and rotor on my 93, runs much better but misses when cold for about ten or fifteen seconds. Ive been told coolant is getting in #6 cyl overnight. Like I say, runs great after started for a little while., Head gasket I hope...
 
  #3  
Old 09-22-2014, 11:43 PM
BlueWorld's Avatar
Beginning Member
Thread Starter
Join Date: Jun 2014
Location: Seattle, Washington
Posts: 13
BlueWorld is on a distinguished road
Default

I'm going to borrow the block test kit at work tomorrow and see if I have any combustion gasses in the coolant. fingers crossed; I dont.
 
  #4  
Old 09-26-2014, 04:30 PM
boscoedoodle's Avatar
Beginning Member
Join Date: Oct 2009
Location: n.west alabama
Posts: 34
boscoedoodle is on a distinguished road
Default

a mechanic put a camera in no 6 cyl overnight and saw some coolant. I guess you could pull the plug and find that out.
 
  #5  
Old 09-27-2014, 10:06 AM
abig84's Avatar
BF Veteran
Join Date: Aug 2009
Location: munster indiana
Posts: 3,424
abig84 will become famous soon enoughabig84 will become famous soon enough
Default

intake gaskets can do that too which is a very common problem for these 4.3's my truck has bad valve guides being the engine is 24 years old so i get the little puff of smoke in the morning. if i dont drive that truck for about 2-3 days it will idle rough for a few seconds til it burns all that crap
 
  #6  
Old 10-07-2014, 07:34 AM
boscoedoodle's Avatar
Beginning Member
Join Date: Oct 2009
Location: n.west alabama
Posts: 34
boscoedoodle is on a distinguished road
Default

I replaced the valve stem seals in my 93' a few years ago. It wasn't that bad.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ussexplorer
1st Generation S-series (1983-1994) Tech
0
09-27-2013 03:38 PM
94s10blazin
1st Generation S-series (1983-1994) Tech
4
08-10-2013 01:00 PM
mandy0917
Engine & Transmission
2
06-04-2011 07:15 AM
rummie
Engine & Transmission
1
01-25-2010 08:23 AM
rriddle3
General Chat
10
08-26-2007 04:38 PM



Quick Reply: Dead Miss at Cold Start



All times are GMT -5. The time now is 04:28 AM.