timing issue, it started, but now what
#1
timing issue, it started, but now what
Ok so i have a 94 s10 blazer 4.3, I just did the head gaskets and went to time it and i got it to start by setting engine at tdc and then putting dizzy to number one. it started but its rough i still havent plugged in the wire under the dash though.
but awhile back i did the timing and the mark lined up with the timing tab when i used the timing light but now tdc has me set the crankshaft half way between the 2 marks. can it start if its off one plug. it started but it is running a lil rough.
and is the timing light useless on this type of vehicle?
but awhile back i did the timing and the mark lined up with the timing tab when i used the timing light but now tdc has me set the crankshaft half way between the 2 marks. can it start if its off one plug. it started but it is running a lil rough.
and is the timing light useless on this type of vehicle?
Thread
Thread Starter
Forum
Replies
Last Post
hotrodln
2nd Generation S-series (1995-2005) Tech
17
04-26-2010 07:32 PM
scottyk
1st Generation S-series (1983-1994) Tech
1
02-27-2007 11:51 PM