wiring up dual toggle ignition
#1
wiring up dual toggle ignition
ok so i know i need to wire up the on/off toggle switch to the ground, load, and power wires that are inside the ignition, but where are they under the hood? i have an 89 4x4 sport. what color are which wires, pics? etc. i'll just pull the wires through the firewall out of the ignition(after i take appart the ignition and cut the wires) and then reroute them underneath the stereo where there's all that empty space. thanks in advance for the help
#2
RE: wiring up dual toggle ignition
This section is not to request for help with a DIY job. It is strictly designed for completed DIY submissions by any of our members on any topic (cold air intake, HID lights, flushing a coolant system, etc.). Please post in the appropriate section.
Thank you.
Thank you.
#3
RE: wiring up dual toggle ignition
*Moving to 1st Gen Tech*
Thread
Thread Starter
Forum
Replies
Last Post
96jimmyslt4x4
Lighting & Electrical
3
04-27-2011 06:46 AM
vin791
1st Generation S-series (1983-1994) Tech
1
11-26-2008 09:07 AM