just changed the CPI injector in 95 Blazer
#1
11-14-2010, 10:52 AM
just changed the CPI injector in 95 Blazer
I started smelling fuel again, and the engine was running rough, almost dying at idle.
So I took off the upper plenum and its still wet with fuel on the passenger side. I did not replace the fuel line or "nut kit", but the driver side is still dry as a bone. So basically it looks the same as before I spent $400 on the spider replacement.
So I took off the upper plenum and its still wet with fuel on the passenger side. I did not replace the fuel line or "nut kit", but the driver side is still dry as a bone. So basically it looks the same as before I spent $400 on the spider replacement.
Thread
Thread Starter
Forum
Replies
Last Post
93LT
1st Generation S-series (1983-1994) Tech
45
11-13-2010 06:13 PM
dlippiet
1st Generation S-series (1983-1994) Tech
9
10-27-2010 11:37 PM
