door sagging and wont close tight - Blazer Forum - Chevy Blazer Forums

Go Back   Blazer Forum - Chevy Blazer Forums > Mechanical & Maintenance > General Tech Help > 2nd Gen S-series (1995-2005) Tech

Closed Thread
LinkBack Thread Tools Search this Thread
Old 04-02-2009, 11:56 PM
Beginning Member
Join Date: Mar 2009
Posts: 15
Jakester91119 is on a distinguished road
Default door sagging and wont close tight

so my passenger door sags and wont close tight. i bought the bushings for it today is that gonna help at all or is it something more then that??
Old 04-03-2009, 03:06 AM
Starting Member
Join Date: Feb 2007
Location: Bloomington, IN
Posts: 221
dBsound is an unknown quantity at this point

It depends on how eggshaped your bushing holes are. If they are eggs, it's just gonna let the new ones crack, too.

I was gonna wait a month or two, before I posted this(to see if it works), BUT, I put new bushings and pins in, a couple of weeks ago. I propped the door up, into perfect position, and filled the holes with JB Weld and the bushings. Let it set for a couple of hours, propped, then, holding it up with the window frame(window down obviously), closed the door, and didn't open it for at least a day.

So far, so good, it looks like it filled the eggs!
2001 Jimmy 4WD
1998 Jimmy Partsmobile!

Last edited by dBsound; 04-03-2009 at 03:09 AM.
Old 04-03-2009, 09:24 AM
joerum's Avatar
Beginning Member
Join Date: Mar 2009
Location: Akron, OH
Posts: 33
joerum is on a distinguished road

hey there jakester, i replaced the hinge pins and bushings about a month or so ago in my driver side door. i had a slight sag and door had a air leak from not closing properly. ever since i put the new pin and bushings in the door has no problems. the air leak is gone and the sag isn't there anymore. if you do change out these parts make sure to purchase a container of some good lithium grease because you will have to keep puting a good amount on the pins and pivet points or you will kill the replaced parts. i think that this will cure your problem and its a pretty easy fix to. only toke me a hour or so with a helping hand of a jack to hold up the door for me!
2000 Blazer 2DR 2wd
K&N cold air intake
drilled and slotted rotors
Black 15in. cragars in
275r55r15 Dunlop G/T Qualifiers
Old 04-03-2009, 02:11 PM
Beginning Member
Join Date: Mar 2009
Posts: 15
Jakester91119 is on a distinguished road

thanks guys ya it did take about an hour and it was a pain in the butt cause i did it at school and have kids in my class that think they know everything and want to help. but it worked and it closes tight now lets just hope it stays that they. they werent egg shaped from what i could see so hopefully it will last a while. but thanks to both of you guys
Closed Thread

Similar Threads
Thread Thread Starter Forum Replies Last Post
Driver door wont close! Fatguy9 2nd Gen S-series (1995-2005) Tech 8 08-23-2015 10:01 PM
New Door Hingepins - sm bushing TIGHT! WalkGood 2nd Gen S-series (1995-2005) Tech 2 07-18-2013 04:47 PM
right rear door rattles when locked. not tight. how to adjust 1st Gen S-series (1983-1994) Tech 2 12-12-2011 12:48 PM
sunroof wont close plz help justin95dime 2nd Gen S-series (1995-2005) Tech 2 06-30-2010 08:44 PM
SAGGING DOOR EuroGoldLS 2nd Gen S-series (1995-2005) Tech 5 03-30-2007 02:35 PM

1998, 2001, 96, blazer, bushings, change, chevy, close, door, doors, fix, hinge, pins, sag, sagging, wont

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


All times are GMT -5. The time now is 06:48 AM.