Strick
10-26-2007, 08:02 PM
A good friend of mine has just finished another phase on his TB SS. His previous setup consisted of 402 stroker, stall, gears, built 4L65, and a 150 shot. It made 692rwhp with this setup, and its maiden track voyage produced two 6.9X's at 100mph. He started spraying close to 100ft, and obviously traction was a major issue. The 1.69 short times weren't helping, and that was all motor. With some minor changes to attempt to help traction, he ran it again in the on the 1/4 mile where it ran 11.01 @ 128mph.
He just added a direct port setup, changed the camshaft, and added headers. He just got it tuned and made 800rwhp/680rwtq, on a 250hp shot. Also added are a custom set of Bogart D10 wheels...........17x5 up front, and 17x10's in the rear. Some 390/40-17 M&H DR's out back fixed the traction problem.
He ran this new setup in Memphis a few weeks ago at the LSX Shootout, where he posted his best time so far before getting kicked off the track...........10.63 @ 129mph!!
Direct port......
http://i171.photobucket.com/albums/u306/rpm1_photos/RPM1.jpg
http://i171.photobucket.com/albums/u306/rpm1_photos/DSC06102.jpg
Custom Bogart's....
http://i171.photobucket.com/albums/u306/rpm1_photos/DSC06117.jpg
http://i171.photobucket.com/albums/u306/rpm1_photos/DSC06115.jpg
http://i171.photobucket.com/albums/u306/rpm1_photos/DSC06112.jpg
Here are some pictures I took of it with its street wheel setup....
http://www.hpjvids.com/mods/rpm/allsmall/IMG_1826.jpg
http://www.hpjvids.com/mods/rpm/allsmall/IMG_1831.jpg
http://www.hpjvids.com/mods/rpm/allsmall/IMG_1833.jpg
Stay tuned in the next few weeks for some hopeful mid 10 second passes. His goal is to tote the front wheels. :D FWIW all work was done by www.ryansperformance.com
(delete the link if necessary mods, not sure if it violates the rules......definately not trying to get a free plug)
He just added a direct port setup, changed the camshaft, and added headers. He just got it tuned and made 800rwhp/680rwtq, on a 250hp shot. Also added are a custom set of Bogart D10 wheels...........17x5 up front, and 17x10's in the rear. Some 390/40-17 M&H DR's out back fixed the traction problem.
He ran this new setup in Memphis a few weeks ago at the LSX Shootout, where he posted his best time so far before getting kicked off the track...........10.63 @ 129mph!!
Direct port......
http://i171.photobucket.com/albums/u306/rpm1_photos/RPM1.jpg
http://i171.photobucket.com/albums/u306/rpm1_photos/DSC06102.jpg
Custom Bogart's....
http://i171.photobucket.com/albums/u306/rpm1_photos/DSC06117.jpg
http://i171.photobucket.com/albums/u306/rpm1_photos/DSC06115.jpg
http://i171.photobucket.com/albums/u306/rpm1_photos/DSC06112.jpg
Here are some pictures I took of it with its street wheel setup....
http://www.hpjvids.com/mods/rpm/allsmall/IMG_1826.jpg
http://www.hpjvids.com/mods/rpm/allsmall/IMG_1831.jpg
http://www.hpjvids.com/mods/rpm/allsmall/IMG_1833.jpg
Stay tuned in the next few weeks for some hopeful mid 10 second passes. His goal is to tote the front wheels. :D FWIW all work was done by www.ryansperformance.com
(delete the link if necessary mods, not sure if it violates the rules......definately not trying to get a free plug)