so i put in my new soud

this is the deck

http://www.bestbuy.ca/catalog/proddetail.asp?logon=&langid=EN&MSCSProfile=3C79F0C7EA3162B2F92BD3A1477EAC01AFEBB6 E418888FE736C862EB5CEE4FC0994313FBB8DAA23A8C54AC4B AEB761A78DD2ED8BDEA3949E98A45BABA685EAC870934D3D29 912B6BF7EE53ED62A883076F98241440081C896576D44E8F18 C1ADFB2C8A4B336EFDE3164F1340B0CB5124BD2B2280A10D05 A5&sku_id=0926INGFS10039228&catid=21981#


this is the amp:

http://www.bestbuy.ca/catalog/proddetail.asp?logon=&langid=EN&MSCSProfile=3C79F0C7EA3162B2B9AD68C2316B6FA16A716C 0D30DDC65973E6A60228EF04B6740CBC2BE103D2C2D6DDDE76 6F2E46D5FD9C56D1B437F8AED89B969FB945B605663ADB4078 D476F5C499C3323E955B7577EF97EE820818E0F2333E9DCD10 1F43A9ABF063B448A78DBD67F39515ECFB0C4C99EFBAB219B4 8A&sku_id=0926INGFS10061021&catid=20103

and so i get it all wired up and.....wtf...my sub doesnt pound......god damn, forgot to run a Remote wire. shoot me please. i find this out AFTER i put it all back together. i was in a rush. sux 2 be me. im also a bit of a retard when it comes to doing this. anyone got any tips for what to look for, or make sure i do before i put it all back together again, to find out its all bunked again?

well, just make sure errything is hooked up. remote is like a power switch for your amp. basically, when your deck turns on, your amp turns on. you could run it through a toggle switch. that way, you can turn off your amps. hope i helped! holla!

start it up and make sure everything is runing and nothing is phasing out( when you hook the POS and NEG) up back words the woofer will go in instead of out and make sure the amount of ohms u r runing is correct to avoid amp damage

make sure everything is connected securely and to the correct place. check inline fuse and fuses on amp. make sure you have a good ground (test metal with a digital multimeter, then sand away dirt/paint, and bolt ground wire on tight). if all else fails, trash that crappy sony amp.