I Was WOndering If I COuld Get Away With A 2 In Fron And 3 In Rear Drop Without And Cutting And Have No Rubbin'.....I'm Just Trying To Fill The Wheel Wells

i was getting ready to post that samething i have a blazer xtreme 02 that i am putting on eagle 025 rims 20x8.5 w/ 245 35 20 will this work with a 2/3 drop i want to take out the stock coil and replace it with a 3" coil = 2 inch drop let me know

Dose Anyone Kno If I COuld Do This???? Cause I Don't Wanna Do It And Get Screwed Cause My Tires Will Rub

best way to find out is do some measuring. with stock wheels and tires you could, but where you have custom wheels and tires, you have to measure.

Ty Sir I'll Have to Bst Out The Ruler Tomorrow While It's In My Shop. While I'm Wiring My Stero Up.

ORIGINAL: blazerxtreme1

i want to take out the stock coil and replace it with a 3" coil = 2 inch drop let me know


If I was you id spend the little extra $$ and get spindles and not coils.