|
|
|
|
View Full Version : 95 Blazer clear corner lights BlazinOn20s 12-03-2005, 01:02 AM I have my grill off, made a custom mesh grill and while I have it all out I wanted to install my clear corners. However, most vehicles the turn signal/clear corners seperate from the headlight housing. With the 95 it's all once piece. I have the whole headlight harness out and can't figure out how to get it seperated so I can install my clear corners. Any help at all would be great, especially 2night. Thanks, Dan BLZNHOT97 05-18-2006, 02:08 AM SORRY I DONT KNOW EITHER CUZ IM TRYING TO DO THE SAME DAMN THING! YOU GOT THE COMPOSITE HEADLIGHTS-ONE PIECE. I KNOW EBAY SELLS THE WHOLE THING FOR ABOUT 100 BUCKS + SHIPPING WHICH IS NOT MUCH BUT THEY LOOK REALLY GREAT! BUT IF YOU HAPPEN TO COME ACROSS ON HOW TO FIND OUT HOW TO DO THAT THEN LET ME KNOW ASWELL. THANKS & GOOD LUCK deadpool 07-29-2006, 01:22 AM anybody care to shed any light on this? downhilryder 07-30-2006, 11:48 AM i just did mine you have to heat them up to pull the lense off the light, to do this i took everything off them, took the lights out and the little clips on the top and bottom next i heated the oven to 350 and put the light on a tray in the oven, i kept taking it out and tryin to pull off the lense and once it is hot enough it comes right off, just use a screwdriver to seperate them, then the yellow comes right out, then put them bak in the oven to heat it up again and put it bak together and put the clips on it thats how i did it hope it works for u minijosh 08-03-2006, 11:09 AM HEHE was that on a non stick pan or a pampered chef stone? downhilryder 08-03-2006, 01:02 PM non stick Jman 08-03-2006, 01:16 PM Ya know your a RedNeck when........... you cook your truck parts in your wifes oven. [sm=icon_rock.gif] Hey honey, dem der blinkers cooked yet? lol Got any pics? downhilryder 08-03-2006, 02:46 PM lol it works though i dont have any pics right now ill try to get some swartlkk 08-03-2006, 02:53 PM Hey, it's how I cleared the turn signals on my Bonneville! Before: http://72.225.23.217/base/pics/2001%20Bonnie%20SSEi/bonnie_05.28.04%20006_thumb.jpg After: http://72.225.23.217/base/pics/ICE/ice1t.jpg Jman 08-03-2006, 03:02 PM So all your doing is heating them up to get apart, and pull the yellow/orange backing off? I might have to try this redneck repair. lol I'll have to wait till the GF is at work so I don't end up in the dog house again. lol slammins15 08-03-2006, 08:00 PM x |
|