I have a set of ported and polished heads still in shipping crate. i bought them from timetoblaze (http://www.blazerforum.com/showProfile.asp?memid=58)back in 8/08. they are sitting in my shop. i will get the casting numbers up shortly. my motor blew before i could put them on. i started saveing up parts for a rebuild until i pulled the heads off and found #3 piston was smacking the head. i found a good deal on a 08 1500 enginewith 1047 miles on it so i wont need these parts anymore: nib waterpump wp-9020 bought at advanced, fel-pro head gasket set, fel-pro oilpan gasket. i will also get rid of any parts that you want from my old motor. i will be also getting rid of some parts off the new motor as well. all that i can think of right now would be the whole intake system since i will be bolting up a marine maifold. i will list more parts (if any) when that motor gets to my shop.

i know this is a blazer forum(just trying to give other members a great deal), but i have 2 jeep cherokees. one iam using for parts. its a 92 4dr. power everything. it is missing the whole front clip and iam pulling the whole 4x4 drivetrain. let ne know what u need. when iam done pulling the parts i need, its going to the junkyard.

i will accept all reasonable offers. i want all of this gone.

i will also accept trades for any of these parts. let me know what u have

Water pump pulley? Is it off the 4.3? Price shipped to 44452

i have to check if there is one on the new motor. the motor should be in by the end of the week. if i have a extra one you can have it for $5 plus shipping. ill check on shipping when that motor comes in.

Thanks Let me know

ORIGINAL: tmaxxs10

Water pump pulley? Is it off the 4.3? Price shipped to 44452


its for the 4.3. pulley off my old engine-$5 shipping-$4.95


UPDATE ON PARTS
jeep is going to scrapyard.
still have parts listed above. also have a timing set for 4.3 new in box.
the intake off the 08 engine is drive by wire. let me know if anyone has a use for it before i stick it on e-bay. iam also getting rid of the coil packs off this engine.

some pics of the heads. sorry they were taken on my cell.



http://i249.photobucket.com/albums/gg203/LEAVEAPOOP/heads2.jpg
http://i249.photobucket.com/albums/gg203/LEAVEAPOOP/heads3.jpg
http://i249.photobucket.com/albums/gg203/LEAVEAPOOP/heads1.jpg

timing set for 4.3 new in box, what years does it fit ? how much ? i may buy it for a spare

You don't by chance have an extra jeep rim sitting around?

how much for the heads?

ORIGINAL: bodean

timing set for 4.3 new in box, what years does it fit ? how much ? i may buy it for a spare



Part #73112 will fit 95-99 blazer. retails for $62.99. i will let you have it for $30 shipped.

ORIGINAL: bammontana

You don't by chance have an extra jeep rim sitting around?



I have the matching set of 5. i kept them to sell as a complete set. the tiresare no good. i can have them removed before shipping.shipping maybe alittle high, but if your interested shot me an offer.

ORIGINAL: skyviper19765

how much for the heads?



sent pm.

Good guy to deal with. Thanks

hey man it sounds like you got alot of stuff i may need. i have a 89 gmc s-15 jimmy 4x4 w/ 4.3l and it seems to have a fluid problem, it has been going through more water then gas and now is seems to just pour out the engine so i need any and all parts you may have for my vehicle o also it has a beat down tranny 2 so whatever you got lemme know

How much for the heads?

ORIGINAL: Bumpin_Jimmy_on_Dubz

hey man it sounds like you got alot of stuff i may need. i have a 89 gmc s-15 jimmy 4x4 w/ 4.3l and it seems to have a fluid problem, it has been going through more water then gas and now is seems to just pour out the engine so i need any and all parts you may have for my vehicle o also it has a beat down tranny 2 so whatever you got lemme know



sorry i dont think any of my parts will fit on a 89

ORIGINAL: mrafindley

How much for the heads?




pm sent

have the heads been on a flow bench ? if so what are the specs ?

have the heads been on a flow bench ? if so what are the specs ?


Sorry, no

Sorry, no


ill pass on them then.

Do you have the injector spider assembly for the 4.3?

yes i still have it. its off of a 97 with 130k miles not sure if its the stock unit or if it has been replaced before. it worked fine but i believe the regulator was starting to leak. shoot me an offer on the whole manifold or just the injectors.

yes i still have it. its off of a 97 with 130k miles not sure if its the stock unit or if it has been replaced before. it worked fine but i believe the regulator was starting to leak. shoot me an offer on the whole manifold or just the injectors.

I just need the spider assembly. Forgive my ignorance but is the regulator part of the injector assembly and would I just be able to swap mine in for yours? The part of my spider assembly that needs replacing is the poppet nozzles so as long as the regulator is swappable your unit should be good.

The regulator is changeable. run a search on how to change the regulator that will tell you all the details on how to do it alot better then i can tell you. and if your still interested in the injectors pm me a offer.

Sent you a pm.

I just need the spider assembly. Forgive my ignorance but is the regulator part of the injector assembly and would I just be able to swap mine in for yours? The part of my spider assembly that needs replacing is the poppet nozzles so as long as the regulator is swappable your unit should be good.



http://i249.photobucket.com/albums/gg203/LEAVEAPOOP/1.jpg
http://i249.photobucket.com/albums/gg203/LEAVEAPOOP/2.jpg