i have a 96 4x4 4dr blazer. i also have a 96 4x4 blown engine . both w code 4.3 ok bear with me people. i want to pull my 4.3 w code and put it in 96 i have. i then want to install a 1973 4 bolt main 4bbl 350 in the 4x4 blazer that i pulled motor out of .i would then want to install my turbo 400 trans. my original 96 has some body issues but my other 96 is excellent condition besides motor. my goal is to turn my dented 96 into a carburated 350 with non electronic tranny . many questions ahead will my turbo 400 match up to my transfer case? i want to use a duel point dist i dont want this blazer to have any computer or electronic anything! it will not be a rock crawler or a kick ass machine just want a more user freindly set up.i have all these parts allready not afraid of fabrication is this doable? or a royal problem? if my t400 wont work could i use a 700r? any and all adviceis good advice thanks !