My baby's front diff locked up so I had to mod her to be 2WD puppy until she goes to the graveyard. I have some stuff available.

1. Front Driveshaft. Will need at least one U-joint. Cap came off and lost some needle bearings. Suggest you do both. $20 plus shipping.
2. 4WD Vacuum servo w/bracket. $10 plus shipping
3. Actuator cable. $10 plus shipping
4. Front Diff Skid plate (includes bolts but one is not original) $20 plus shipping
5. Transfer Case skid plate (includes two of the three Torx bolts) $20 plus shipping.

I have the two funky spring retainers for the actuator cable as well. I will include them with either the cable or the Vacuum servo whichever sells first OR they are $5 plus shipping for the pair.

All items shipped from 20715
Donor vehicle is a 1987 2.8L Blazer

Donny

local://upfiles/13530/0377C3E16720437DB66203862573B48A.jpg

local://upfiles/13530/1695839585B243C18FFB1691CE65AF58.jpg

Got any pics of the skid plates?

No but I will take some today. I WAS going to clean them up first.

bump

is that vacuum servo from under the battery?