i know the bolt pattern is the same, but about the offset?? will they rub?? i want to do the zo6 18 x 9.5... and i plan to lower my truck 3/3... u guys think they will rub?? can that be solved??

ORIGINAL: djbass_mekanik

i know the bolt pattern is the same, but about the offset?? will they rub?? i want to do the zo6 18 x 9.5... and i plan to lower my truck 3/3... u guys think they will rub?? can that be solved??




you NEED spacers....2.25" or 2.3" for the front, and a 2" or 2.25" for the rear.This if for any 2wd s10. Now if you had a 4x4 s10 the wheels would bolt right up with out any spacers.

for more info check out http://www.s10forum.com/forum/showthread.php?t=241120&highlight=corvette

And corvettes have 9.5" on the back and 8.5" wide in the fron, you should do the same to minimize rubbing or else with a 9.5" wide rim on front your going to rub.

I'd like the vette rims in a DEEP lip. cause its just not deep enough, i was lookin at our vette today and was thinkin of puttin em on mine lol!

ORIGINAL: xtucking22s

And corvettes have 9.5" on the back and 8.5" wide in the fron, you should do the same to minimize rubbing or else with a 9.5" wide rim on front your going to rub.


so is ther 18x8.5??? i was chekin all over and the black zo6 rims ar either 17 or 18x9.5... i didnt see any 8.5....

ORIGINAL: djbass_mekanik


ORIGINAL: xtucking22s

And corvettes have 9.5" on the back and 8.5" wide in the fron, you should do the same to minimize rubbing or else with a 9.5" wide rim on front your going to rub.


so is ther 18x8.5??? i was chekin all over and the black zo6 rims ar either 17 or 18x9.5... i didnt see any 8.5....


No this is what corvetts are
Front 17" x 8.5"
Back 18" x 9.5"

There is no such thing as far as i know as a 18" x 8.5"

Im pretty sure Im right....but just look around and see what you can find. I never looked into corvette rims so I didnt research it all that much, i just read posts in s10 forum all day long and I have seen A LOT about corvette rims.

The rims on my dads 06 vette is 18" front 19" back not sure on the ofset tho lol

ORIGINAL: XBlazer01

The rims on my dads 06 vette is 18" front 19" back not sure on the ofset tho lol


Allright so it all depends on what year corvette rims and what style. They are all going to be different.

here you go. if you got these, these will bolt up just fine with no spacer. What you need is between a +10 mm or +15 mm offset with about 5.5" backspacing. Take a look
http://customwheelsmarket.com/cwm-top-1134-7861b-cam.html

ORIGINAL: XBlazer01

The rims on my dads 06 vette is 18" front 19" back not sure on the ofset tho lol


lol well isn't ur dad spiffy. but it is a nice car...you should let me take it on a joy ride!:D

ORIGINAL: xtucking22s

here you go. if you got these, these will bolt up just fine with no spacer. What you need is between a +10 mm or +15 mm offset with about 5.5" backspacing. Take a look
http://customwheelsmarket.com/cwm-top-1134-7861b-cam.html


well those are the ones i ordered, but all 18x9.5 all around, and im goint to lower it soon with control arms up front... so i guess im goin to have to experiment with the spacers...

ahh very nice....i like the black and chrome