350 into s10 blazer
#1
350 into s10 blazer
I have a general knowledge question if anyone could possibly help me. I'm wanting to drop a 350 crate into my blazer and just wondering what extra parts would be needed to complete the motor swap. I've looked several places but can't find a complete answer. If anyone could help i'd be very appreciative.
#2
Motor mounts, Hugger headers, 2wd or 4wd? If its a 4wd you need the oil pan for clearance issues, Some of the basics
#3
first of all, what truck do you have?
2WD or 4WD? 1st or 2nd gen? (make a big difference).
did you use the "search" function @ the top of the page?
look through the Builds section for a look @ other members who have already done it.
try looking on the S10 forum. there seems to be a lot of guys who own Dimes, needing the extra gas consumption.
2WD or 4WD? 1st or 2nd gen? (make a big difference).
did you use the "search" function @ the top of the page?
look through the Builds section for a look @ other members who have already done it.
try looking on the S10 forum. there seems to be a lot of guys who own Dimes, needing the extra gas consumption.
#4
I apologize, It's a '91 S-10 blazer, 1st gen and 4wd. If there's any other information needed, please yell at me so i put it all out and can get all the feedback i need.
Thread
Thread Starter
Forum
Replies
Last Post
tech180
Full Size K5 (1969-1991) GMT415 (1992-1994) Tech
11
02-02-2013 10:23 AM
poepoe624
2nd Generation S-series (1995-2005) Tech
2
01-10-2010 11:48 AM