88 rebuilt 350 issues
#1
88 rebuilt 350 issues
ok so my buddy decided to pull his motor and get it rebuilt. after putting it back in he had an issue getting it to start ended up being the rocker arms were way to tight so I fixed them started right up so I told him to put it back together. now we are not getting any fuel to the TBI but can here it runner and cant here the fuel pump prime tho. and it is also getting very weak to no spark. I have taken fuel relay, cap, rotor, wires, icm, and coil off known working car and notihng. all fuses look good. what am I missing why would it start right up then notihng. oh yea I also had to turn dizzy 180 cuz that was wrong as well. any way it could have advanced or retarded on its own the dizzy is tight. the truck is a 88 k5 with a 350 TBI 4spd standard.
thanks for any help. until then I will keep readed other posts
thanks for any help. until then I will keep readed other posts
Thread
Thread Starter
Forum
Replies
Last Post
tech180
Full Size K5 (1969-1991) GMT415 (1992-1994) Tech
11
02-02-2013 10:23 AM
khalid_20879
1st Generation S-series (1983-1994) Tech
1
03-13-2006 01:02 PM