You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join Blazer Forum today!
I think what he's looking for is a way to put gas shocks on the hood... I can't remember any threads on this subject here though. I know I found a site a long while ago that had custom made gas shock mounts for s-series vehicles. I'll be looking to do the same thing on my Rainier sometime soon as well.
You can go get the ones they have at Autozone. They are for Jeep Libertys i think, but a buddy of mine put them on his s10 and they are pretty good. You have to figure out precisely which angle and have the pivot joints and everything.
__________________
-----Brent-----
My Cars:
-2000 Blazer LS 4.3L
-1996 Silverado Z71 5.7L
-1981 Z28 Camaro 5.7L
Admin on sister-forum, www.chevroletforum.com
Quote:
Originally Posted by EvansBlue
For the record, the only thing on my Blazer that came from AutoZone is the engine mount.
here is the thread from our site
and it will eventually take you here
EDIT: the guy on txzr2.com said "Phil Chivers of SyTy.net, makes hood strut kits for 1st & 2nd Gen S-10's."
but the link takes you to a syclone/typhoon website so im not sure where you get the 2nd gen kit
eurogoldls is right if your going to do that mod you might want to think about a suicide kit to have it open to a side instead of corvette style have it open to the side
__________________
2001 2wd 4.3 vortec v6
"I'm not fat, I'm a minitrucker"
help with thread
