95 Blazer clear corner lights - Blazer Forum

BlazinOn20s · #1 12-03-2005, 01:02 AM

I have my grill off, made a custom mesh grill and while I have it all out I wanted to install my clear corners. However, most vehicles the turn signal/clear corners seperate from the headlight housing. With the 95 it's all once piece. I have the whole headlight harness out and can't figure out how to get it seperated so I can install my clear corners. Any help at all would be great, especially 2night. Thanks, Dan

Register your account for free or log-in if already registered to remove this ad now!

BLZNHOT97 · #2 05-18-2006, 02:08 AM

SORRY I DONT KNOW EITHER CUZ IM TRYING TO DO THE SAME DAMN THING! YOU GOT THE COMPOSITE HEADLIGHTS-ONE PIECE. I KNOW EBAY SELLS THE WHOLE THING FOR ABOUT 100 BUCKS + SHIPPING WHICH IS NOT MUCH BUT THEY LOOK REALLY GREAT! BUT IF YOU HAPPEN TO COME ACROSS ON HOW TO FIND OUT HOW TO DO THAT THEN LET ME KNOW ASWELL. THANKS & GOOD LUCK

deadpool · #3 07-29-2006, 01:22 AM

anybody care to shed any light on this?

downhilryder · #4 07-30-2006, 11:48 AM

i just did mine
you have to heat them up to pull the lense off the light, to do this i took everything off them, took the lights out and the little clips on the top and bottom
next i heated the oven to 350 and put the light on a tray in the oven, i kept taking it out and tryin to pull off the lense and once it is hot enough it comes right off, just use a screwdriver to seperate them, then the yellow comes right out, then put them bak in the oven to heat it up again and put it bak together and put the clips on it
thats how i did it hope it works for u

minijosh · #5 08-03-2006, 11:09 AM

HEHE was that on a non stick pan or a pampered chef stone?

downhilryder · #6 08-03-2006, 01:02 PM

non stick

Jman · #7 08-03-2006, 01:16 PM

Ya know your a RedNeck when........... you cook your truck parts in your wifes oven. [sm=icon_rock.gif]

Hey honey, dem der blinkers cooked yet? lol

Got any pics?

downhilryder · #8 08-03-2006, 02:46 PM

lol it works though i dont have any pics right now ill try to get some

**swartlkk** · #9 08-03-2006, 02:53 PM

Hey, it's how I cleared the turn signals on my Bonneville!

Before:

After:

Jman · #10 08-03-2006, 03:02 PM

So all your doing is heating them up to get apart, and pull the yellow/orange backing off?

I might have to try this redneck repair. lol I'll have to wait till the GF is at work so I don't end up in the dog house again. lol