You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join Blazer Forum today!
I picked up a 97 blazer for $500. Well i took it throught some trails w/out testing the 4x4, and i found out in some ruts that it don't work. I can hear something clicking under the truck when i out it in 4hi or 4lo. I checked the fuse, and its good, so i beleive the that it is not the switch.
Thanks,
Brandon
Register your account for free or log-in if already registered to remove this ad now!
__________________
-93 Ranger 4x4 3.0 5 spd (soon to get a lift)
-97 Blazer 4X4 4Dr (trans in backseat til it gets warm)
Sponsored Links
tr>
Register your account for free or log-in if already registered to remove this ad now!
What is your truck doing? Is the 4x4 button on your dash indicating that your truck is locked in 4 wheel or is the light just blinking? Do you hear any noises when you push the 4x4 button as if your truck is trying to engage in 4 wheel?
I once had a 93 GMC Jimmy with push button 4 wheel drive. I did a tune up on it and in the process, knocked loose a vacuum line that was part of the 4x4 setup. My hubs were locking, but the 4x4 system was not engaging. The line was on the back of the engine, passenger side some where. Once I reconnected that, worked great.
__________________
"For I can do all things through Jesus Christ who give me strength" Phil. 4:13
__________________
"Some people spend an entire lifetime wondering if they made a difference.
The Marines don't have that problem."
-President Ronald Reagan
'87 S10-Blazer - SOLD
'93 S10-Blazer 4x4x4 - Sons DD, engine swap is done.
'00 S10-Blazer 4x4x4 - My
4x4 Not Working
