93 s10 blazer stalling on idle update.
#1
93 s10 blazer stalling on idle update.
So I ordered new complete distributor from 1aauto.com and I took out my old one omg look at how much rust...maybe this was my 1100 dollar problem? Lol if this fires up and stays on perfect I will be so greatful. Open to any suggestions. All my evap and hoses are tight and not leaking. Getting suction to throttle body. Throttle response but stalling after a little bit. Then distributor is rusted all the way down to the wires inside. I can imagine its having trouble starting and staying on with rust affecting the crank and the ignition. Let me.know your thoughts thanks guys
#2
Welcome to the Blazerforum.
Thread moved as per our rules in the New Member Area.
That's you old distributor?
Doesn't look too bad. What one would expect from an original or long time distributor. Can't see rust on that one.
Thread moved as per our rules in the New Member Area.
That's you old distributor?
Doesn't look too bad. What one would expect from an original or long time distributor. Can't see rust on that one.
Thread
Thread Starter
Forum
Replies
Last Post
STenHeadache
2nd Generation S-series (1995-2005) Tech
5
11-08-2018 11:34 AM
hbryant123
2nd Generation S-series (1995-2005) Tech
15
02-20-2017 10:51 AM
Toby Hanson
1st Generation S-series (1983-1994) Tech
5
03-01-2014 03:19 PM
joey
2nd Generation S-series (1995-2005) Tech
4
07-12-2011 10:22 PM
Nutty 99 Blazer
2nd Generation S-series (1995-2005) Tech
2
04-02-2010 08:50 AM