1st Generation S-series (1983-1994) Tech Discuss 1st generation S-series (1983-1994) general tech topics here.

Carbed sbc 93 jimmy 4x4 with choke issues.

Thread Tools
 
Search this Thread
 
  #1  
Old 10-01-2018, 09:16 PM
_ten_four_'s Avatar
Starting Member
Thread Starter
Join Date: Oct 2018
Posts: 1
_ten_four_ is on a distinguished road
Default Carbed sbc 93 jimmy 4x4 with choke issues.

My 4x4 jimmy has a 305 with a quadrajet and 4l60e with a tps mounted to the carb to have overdrive. It is difficult to cold start, and when it finally starts, the throttle has to be held a bit to keep it running. After about 2 or 3 minutes, it is warm enough to idle regularly. My issue is that my tps is mounted where the choke assembly would be. Would it be possible to somehow make a manual choke for it or any other solutions? Im all ears! Thanks in advance.
 
  #2  
Old 10-02-2018, 01:05 PM
odat's Avatar
Super Member
Join Date: Sep 2013
Location: wyoming
Posts: 1,152
odat is on a distinguished road
Default

Most auto parts stores carry a change over kit from auto to manual choke - but however if you removed all the choke linkage you prob will not have the high idle option
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
PhantomZ
2nd Generation S-series (1995-2005) Tech
0
06-15-2014 12:46 PM
XFX
Engine & Transmission
2
10-15-2013 10:01 AM
bdude273
Engine & Transmission
2
10-04-2013 05:56 PM
Donnie Hanson
General Chat
1
03-20-2011 03:57 PM
spdfrk_29
General Chat
7
09-22-2010 12:24 PM



Quick Reply: Carbed sbc 93 jimmy 4x4 with choke issues.



All times are GMT -5. The time now is 03:43 AM.