IAC and identification
#12
If you read on in your manual, it should tell you that an IAC that has already been installed and used cannot be adjusted. The pressure needed to move the plunger will break the gear in the stepper motor. You can only adjust brand new ones (as you read) when first installing.
#13
If you read on in your manual, it should tell you that an IAC that has already been installed and used cannot be adjusted. The pressure needed to move the plunger will break the gear in the stepper motor. You can only adjust brand new ones (as you read) when first installing.
Thread
Thread Starter
Forum
Replies
Last Post