My 94 does not get to operating temp
#1
My 94 does not get to operating temp
So Ive replaced my thermostat 2 times, one was a Napa one, and the one in it now is a quality GM one I got from work, both were brand new. It was running halfway between 210(its sposed to be at 195) on the Napa one, and the GM one it runs about 160-180. Why wont it get to operating temp?
#2
my truck runs around the 200s too thats how hot these motors like to run
#3
what exactly are u using to check the temp of the fluid in the system? You could have a defective dash guage.. pick up and infrared heat tool, i got one at lowes, aim it at the rad and heater hoses to get temps in the system. don`t just rely on the dash guage. and these blazers, even your year i believe call for a 195 temp thermo..
#4
yeah dont trust the dash gauge i just changed my temp sensor and thermo to a 195 degree and the dash guage says its running at about 150-160.
#5
what exactly are u using to check the temp of the fluid in the system? You could have a defective dash guage.. pick up and infrared heat tool, i got one at lowes, aim it at the rad and heater hoses to get temps in the system. don`t just rely on the dash guage. and these blazers, even your year i believe call for a 195 temp thermo..
Thread
Thread Starter
Forum
Replies
Last Post
kstrange
2nd Generation S-series (1995-2005) Tech
11
06-06-2011 06:56 PM
ColoNico.
Engine & Transmission
2
08-04-2010 09:09 AM
hubert hefner
Engine & Transmission
12
05-12-2010 05:55 PM