Turn signal lever re-assembly
#1
Turn signal lever re-assembly
'91 S10 Blazer-Just replaced the ignition lock cylinder and need to know how the turn signal switch actuator arm attaches to the turn signal lever. One screw holds it to the turn signal switch assembly...I can't figure out how it connects to the turn signal lever. Thanks in advance for any help!!!!
Last edited by terry2707; 01-09-2010 at 08:13 PM.
#2
I figured it out....I used a flashlight to see into the housing and studied the parts a little while, then it all made sense on how to do it. Pretty simple.
Thread
Thread Starter
Forum
Replies
Last Post
karenkolby
Full Size K5 (1969-1991) GMT415 (1992-1994) Tech
5
06-24-2010 11:35 AM
shaka1111
1st Generation S-series (1983-1994) Tech
1
02-13-2006 02:23 PM