Vacuum Line mess up
#1
Vacuum Line mess up
Hey Guys, Okay so i feel like a complete Amature.
On my '91 Blazer S-10 i had taken off a bunch of vacuum lines so that i would be working in less of a tangled mess but now i have a problem. I havnt added any lines or removed any but i am missing one for my 4wd actuator under the battery...can some one tell me where this line starts? thanks.
On my '91 Blazer S-10 i had taken off a bunch of vacuum lines so that i would be working in less of a tangled mess but now i have a problem. I havnt added any lines or removed any but i am missing one for my 4wd actuator under the battery...can some one tell me where this line starts? thanks.
#2
Goes from the transfer case vacuum switch to the front axle actuator.
#3
There is no T-Shapped line splitter at all in between? or Does it go strait throught? Im asking because from some things i have read there is. Is that only for the Supply Line to the transfercase?
#4
There are no 'T's between the front axle actuator and the vacuum switch on the transfer case.
Search around a bit and you'll find the diagram applicable to the NV231/NV233 transfer case. Something like "NV233+vacuum" (without the quotes) will likely turn up the proper posts.
Search around a bit and you'll find the diagram applicable to the NV231/NV233 transfer case. Something like "NV233+vacuum" (without the quotes) will likely turn up the proper posts.
Thread
Thread Starter
Forum
Replies
Last Post
intoodeep95
2nd Generation S-series (1995-2005) Tech
17
11-09-2012 08:53 AM
redneck2725
2nd Generation S-series (1995-2005) Tech
2
08-11-2009 04:01 PM