i got a 93 s10 vortec im not getting fuel to my cylinders i put new fuel pump, lines, filter, plentum, sensors, relays, spyder injectors and computer i have fuel to the spyder unit but its not going into the cylinders i dont know what else to check let me know im not going to be on the internet for the rest of the day so if you get free long distance give me a call at 603-499-5262 and my name is adam thanx

 

Have you verified that you are getting proper injector pulse to the CPI spider? I have seen the connectors go bad inside the plenum.

 

yea i do now i got to much fuel im pouring fuel out my tailpipe fuel pressure regulator you think

 

The FPR is the most likely cause. Pop off the plenum and pressurize the fuel system to see.

BTW, you may want to remove your phone number from the post above. Unless you like telemarketers.

 

i replaced the fpr today im gona try to start it in the morn i just ran out of time

 

Let us know.