Stays in 2wd!
#1
Stays in 2wd!
I have a 1998 Blazer and the it wont engage into 4wd..
The 2wd light is on and when i press the 4high or 4low it doesnt flash or change, the 2wd light just stays on. The transfer case does not make any noises.
Any Ideas?
The 2wd light is on and when i press the 4high or 4low it doesnt flash or change, the 2wd light just stays on. The transfer case does not make any noises.
Any Ideas?
#2
check vaccum lines.
#3
If the 4Hi or 4Lo lights don't blink, then the computer is not getting the command. Maybe your push buttons are dead.
http://dl.dropbox.com/u/837001/Blaze...iagnostics.pdf
Read this carefully and see if it can help.
http://dl.dropbox.com/u/837001/Blaze...iagnostics.pdf
Read this carefully and see if it can help.
Thread
Thread Starter
Forum
Replies
Last Post
cmmyers10
2nd Generation S-series (1995-2005) Tech
3
12-19-2006 03:43 PM