the bastard 95 with a 98 swapped !! but with problems
#1
i have the bastard 95 swapped with a 98 4.3.. kept the 95 700r4 and changed everything else but the computer seems to be lagging (reacting slow).. i did not change out any other wiring inside the truck but changed out the engine wiring and the ecu... anyone have any ideas?? my guess is it acts like there is a short on the can bus wire, or the ecm/bcm communication wire :icon_sh rug:
i forgot to add the truck is the bastard 95 with the first vortec and i swapped the motor and engine wiring harness with the 98 ecm.. and i own the 98 too and it ran excellent in the 98 ... could the bcm in the 95 or the wiring be causing problems??
i forgot to add the truck is the bastard 95 with the first vortec and i swapped the motor and engine wiring harness with the 98 ecm.. and i own the 98 too and it ran excellent in the 98 ... could the bcm in the 95 or the wiring be causing problems??
Last edited by rriddle3; 02-13-2011 at 08:19 PM. Reason: COMBINING CONSECUTIVE POSTS
#2
i think i might have figured out this one.... all to do with the 700r4... which deep 6'ed .. just gotta do the swap now.. well find the time anyway
Thread
Thread Starter
Forum
Replies
Last Post
JimmyBlaze
Engine & Transmission
1
10-06-2009 05:14 PM