2nd Generation S-series (1995-2005) Tech Discuss 2nd generation S-series (1995-2005) general tech topics here.

Fuse #4 keeps blowing...anything common besides the 4WD indicator switch?

Thread Tools
 
Search this Thread
 
  #1  
Old 07-06-2016, 02:32 PM
ncpi's Avatar
New Member
Thread Starter
Join Date: Jan 2010
Posts: 7
ncpi is on a distinguished road
Default Fuse #4 keeps blowing...anything common besides the 4WD indicator switch?

Looking for help....My fuse #4 keeps blowing (1996 S10 Blazer with manual 4WD), usually in less than a minute of driving. There are a bunch of items on this circuit. I went thru this a few years back and it was the 4WD indicator switch on the front axle. I have unplugged that, its not the problem this time. I have tried turning the steering, wiggling wires in the engine bay, etc and can't get the fuse to blow while I play. When I drive it, it takes only a very short distance. Unfortunately, the Alternator field is powered from this circuit, so once Fuse #4 blows its running off the battery.

Anyone have knowledge of a common problem that causes Fuse #4 to blow?

...Bill
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gmcgough12
Steering, Suspension & Drivetrain
0
11-13-2014 12:32 PM
AustinBlazer
2nd Generation S-series (1995-2005) Tech
6
06-04-2013 10:35 AM
Sledhead JZ
Full Size K5 (1969-1991) GMT415 (1992-1994) Tech
0
01-19-2012 09:36 PM
tonym99
2nd Generation S-series (1995-2005) Tech
1
11-16-2011 09:39 AM
rxhvn
1st Generation S-series (1983-1994) Tech
1
12-17-2009 08:03 AM



Quick Reply: Fuse #4 keeps blowing...anything common besides the 4WD indicator switch?



All times are GMT -5. The time now is 08:10 PM.