ICM & Ignition Coil checking
#1
02-15-2015, 03:20 PM
ICM & Ignition Coil checking
Hello All,
Does any one know how to check the (ICM)Ignition Control Module and Ignition Coil with a multimeter? I have acquired a few and would like to check them to see if I can keep them or throw them away....Thank you for looking...Tony
Does any one know how to check the (ICM)Ignition Control Module and Ignition Coil with a multimeter? I have acquired a few and would like to check them to see if I can keep them or throw them away....Thank you for looking...Tony
#3
02-15-2015, 07:13 PM
ICM AND Coil testing
Thank you richphotos,
I took them to Autozone and they did test the ICM but they could not on the coil due to their meter was not working...but he did give me this worksheet. Primary Check value = .15 -.6 and Secondary Check value = 3.0k -10.0k (NOT 10.OK but 10.ZERO k).see attached...ok hope this helps others in the future.
I took them to Autozone and they did test the ICM but they could not on the coil due to their meter was not working...but he did give me this worksheet. Primary Check value = .15 -.6 and Secondary Check value = 3.0k -10.0k (NOT 10.OK but 10.ZERO k).see attached...ok hope this helps others in the future.
Last edited by jkyle187; 02-15-2015 at 07:17 PM. Reason: added info
#4
02-15-2015, 08:45 PM
Thread
Thread Starter
Forum
Replies
Last Post
billyboy2287
2nd Generation S-series (1995-2005) Tech
0
10-01-2013 07:14 PM
Lancealot
2nd Generation S-series (1995-2005) Tech
8
02-22-2011 07:34 AM
cannibal440
Performance & Brainstorming
4
03-18-2008 10:47 AM
USMaverick101
General Tech Help
4
10-31-2006 03:10 AM
