Radiator Shroud
#1
Radiator Shroud
So I am currently about 80% done piecing together items needed for the rebirth of my 98 blazer... I need to replace the radiator/fan shroud... I am open to ideas preferrably as cheap as possible... If I save enough rebuilding it to be street legal I can add a leaf and shackles and maybe put a nice little payment towards a 6incher...
#2
um.... why not just go to 'a wealth of quality parts' a.k.a "cash for clunkers" filled junk yard and yank one from a s10/s15, blazer/jimmy, etc and walk out with a $10-15 tab as opposed to trying to fab one. even if you get a sheet of 1/8th aluminum and bend to suit, you will be in for more than that...
#3
One of the better "cheaper" solutions I've seen is to use a aluminum cookie pan thats as close to the core size as you can get. Cut the hole for the fan and attach it.
I built my first one from aluminum I had laying around. The fans I have now are off a intrepid (2 11 inches) and the factory shroud covered the rad just fine.
Intrepid fans before I put them on. Wish I had after pics
I built my first one from aluminum I had laying around. The fans I have now are off a intrepid (2 11 inches) and the factory shroud covered the rad just fine.
Intrepid fans before I put them on. Wish I had after pics
Thread
Thread Starter
Forum
Replies
Last Post
ericthughes
Full Size K5 (1969-1991) GMT415 (1992-1994) Tech
6
08-07-2010 07:43 AM
ericthughes
Full Size K5 (1969-1991) GMT415 (1992-1994) Tech
5
05-18-2010 09:11 PM
oshkosh
2nd Generation S-series (1995-2005) Tech
5
09-16-2008 04:56 PM