A/T Trans fluid change...
#1
06-01-2010, 04:27 PM
A/T Trans fluid change...
Hey! I know this issue has been rehashed here several times,but a question remains...
The cross member on my 97 is not really an issue,because when I remove the nuts from the tranny mount I am able to raise the trans & transfer case at least an inch which clearly provides enough room for pan removal; but:are any of the solonoids at the back of the trans? Because I will have to wiggle the pan to clear the X-member and don't wish to damage those units.This is what stopped me from completing this job on a holiday weekend!
Any diagrams available anywhere? Thanks in advance for any input!
The cross member on my 97 is not really an issue,because when I remove the nuts from the tranny mount I am able to raise the trans & transfer case at least an inch which clearly provides enough room for pan removal; but:are any of the solonoids at the back of the trans? Because I will have to wiggle the pan to clear the X-member and don't wish to damage those units.This is what stopped me from completing this job on a holiday weekend!
Any diagrams available anywhere? Thanks in advance for any input!
#2
06-01-2010, 05:11 PM
There are solenoids on the back of the valve body. The schematic shown in any one of the transmission codes shows the location. Let me see if I can paste it into this thread for you.
Here ya go:
Here ya go:
Thread
Thread Starter
Forum
Replies
Last Post
BrinkDiamond
Engine & Transmission
4
03-02-2014 03:50 PM
DaleA
2nd Generation S-series (1995-2005) Tech
6
01-13-2009 08:50 PM
aaron1651
Steering, Suspension & Drivetrain
7
03-26-2008 12:18 AM