Crank no start. No fule no spark condition
#1
Crank no start. No fule no spark condition
I have a 2003 4x4 blazer 4.3l with a crank no start, no spark or fule condition I was driving it just died. troubleshooting I replaced
if anyone has any tips or suggestions or if your dealing with a similar problem I'd appreciate the help I also have a diagnostic tool also but I haven't gotten to pulling the codes
Please and thank you for your help
- ignition control module
- Ignition coil
- Distributor cap and rotor
- Ignition switch in the steering column
- The brain I think its called the (ecm)
- Crank and cam sensor
- Fule pump
if anyone has any tips or suggestions or if your dealing with a similar problem I'd appreciate the help I also have a diagnostic tool also but I haven't gotten to pulling the codes
Please and thank you for your help
#2
I also want to reiterate to examine that I see M connector because the white and black wire runs right next to the black and white ground wire so make sure there’s no damage there as a source of this partial short before we start cutting wires
Thread
Thread Starter
Forum
Replies
Last Post
chevyragtopguy
2nd Generation S-series (1995-2005) Tech
5
02-28-2016 10:28 PM
turtle21505@verizon
2nd Generation S-series (1995-2005) Tech
4
03-02-2009 02:27 PM
FULLTHROTTLE
2nd Generation S-series (1995-2005) Tech
3
11-11-2007 05:08 PM