Doe's anyone know what these two hoses are?
#1
Doe's anyone know what these two hoses are?
1996 Chevy Blazer 4.3L V6 4x4 4L60e tranny
I caught sight of these hoses while changing the valve body. They seem to be coming from above the tail end of my transmission. I can't tell exactly because it's too carmped to see or feel where they start from. I'm a little worried cause one of them has like a 1 in 2 out vacuum line type thing at the end of it and the other one looks like it's been ripped or cut with a butter knife. Are these two hose just supposed to be hanging like this.
I caught sight of these hoses while changing the valve body. They seem to be coming from above the tail end of my transmission. I can't tell exactly because it's too carmped to see or feel where they start from. I'm a little worried cause one of them has like a 1 in 2 out vacuum line type thing at the end of it and the other one looks like it's been ripped or cut with a butter knife. Are these two hose just supposed to be hanging like this.
#2
Can't tell exactly from the pictures, but they are for the 4WD, (which probably doesn't work now). There are 3 lines that attach to the vacuum switch on the driver side of the transfer case, just inboard and slightly above the encoder motor:
EDIT: Here is the vacuum schematic:
EDIT: Here is the vacuum schematic:
Last edited by Captain Hook; 09-09-2012 at 08:23 PM.
Thread
Thread Starter
Forum
Replies
Last Post
0ffroader
2nd Generation S-series (1995-2005) Tech
3
05-04-2013 12:25 AM
newguy
2nd Generation S-series (1995-2005) Tech
2
03-22-2013 09:36 AM