Metal Fuel Lines bent, please help
 

Hi everyone, new to posting here but I've been lurking for a couple months now. I was hoping to get some help on something...

I did the MFI upgrade a few days ago to my wife's 01 Blazer and now the metal fuel lines that go over the upper intake manifold (one has the pressure release valve) won't stay in the holes. Apparently, I bent them some and I can't really get them bent back to stay in there.

I was looking on line for the past few hours and I can't find a part number for this part to order a new one. Please let me know if anyone can help with this.

Thank you in advance for the assistance.

Edited: here's a link of a pic of the exact part: http://thumbs1.ebaystatic.com/d/l225...Fa6pFYcrrg.jpg

Try loosening the bolt that holds that small section of lines to the back right corner of the intake. This may give you enough wiggle room to get the lines retainer cap and nut on. I know the portrusions on the retainer need to face down to properly seat the lines in their holes. Retighten bolt on back right corner of intake.