No spark on 1997 Blazer
#1
![Default](https://blazerforum.com/forum/images/icons/icon1.gif)
I have a 1997 blazer it turns over fine but thiers no spark we tested at the coil the old screwdriver and wire trick to see if we could see the spark jump nothing, then replaced the coil twice still nothing. There is a wire coming out from the harness (red) right beside the battery that is not hooked up to anything wondering if maybe this wire powers the pcm? Electrical is not my stong suit so any help or dirrection would be greatly appreciated.
#2
![Default](https://blazerforum.com/forum/images/icons/icon1.gif)
With the ignition in the RUN position, does the pink wire at the ignition coil show battery voltage?
#3
![Default](https://blazerforum.com/forum/images/icons/icon1.gif)
Got it fixed loose connection thanks for pointing me in the right direction. The engine started runs good but.. i'm getting a check engine code p1864 from what iv read its a solenoid attached to the transmission do anyone know how to check it or steps on how to remove replace it. Or what it even looks like so i can get a starting point
Last edited by gtmccormick; 09-17-2012 at 12:09 PM.
#4
Guest
Posts: n/a
Thread
Thread Starter
Forum
Replies
Last Post
JavierEscalonJr
2nd Generation S-series (1995-2005) Tech
11
10-14-2020 11:38 PM
monette999
2nd Generation S-series (1995-2005) Tech
12
06-11-2015 01:53 PM
abe_f
2nd Generation S-series (1995-2005) Tech
2
04-01-2013 11:19 PM
Yankee Team1020
2nd Generation S-series (1995-2005) Tech
23
08-03-2011 08:05 AM