Where is the cam positioning sencor?
 

I don't know where this is but I need to replace it so can anyone direct me to it please? Thanks

RE: Where is the cam positioning sencor?
 

If you remove the right front wheel you should see it in the engine block.
http://service.gm.com/engif/000/000/010/10815.gif

RE: Where is the cam positioning sencor?
 

That picture just looks wrong... LOL.

Anyway, the CMP is located under the distributor cap. You must remove the distributor cap, the rotor, and align the square slot in the reluctor ring under the rotor with the boss on the CMP.
http://i11.photobucket.com/albums/a1...a/CMP_slot.gif
Then remove the CMP.
http://i11.photobucket.com/albums/a1...MP_removal.gif

RE: Where is the cam positioning sencor?
 

Thanks for the correction Kyle, I don't know what I was looking at, but it looks like some kinda 4 cyl.
Sorry guys, I made an oops.[sm=oopssign.gif]

RE: Where is the cam positioning sencor?
 

How exactly do I do this (align the square slot in the reluctor ring under the rotor with the boss on the CMP). Do these normally go bad too and why?