Blazer Forum - Chevy Blazer Forums

Blazer Forum - Chevy Blazer Forums (https://blazerforum.com/forum/)
-   Audio/Video Electronics (https://blazerforum.com/forum/audio-video-electronics-8/)
-   -   Car Audio Discussion (https://blazerforum.com/forum/audio-video-electronics-8/car-audio-discussion-50256/)

MTopper 10-15-2010 06:35 PM

Car Audio Discussion
 
this is just a thread for any and all discussion of Car Audio.

Not a "hey help me out with something thats been asked a million times"

Talk about:
subs
amps
speakers
radios
and anything of interest


It'd be nice if a mod could sticky this for us

wlorton 10-15-2010 09:11 PM

Touch screen double dins.... Good deals? Recommendations?
Also, how much needs to be trimmed in the 1.5 din to fit? (Mack if you say .5 din, I am coming to michigan and pooping in a bag on your porch!!!)

RangerG 10-15-2010 10:38 PM

I like this idea. I have a few stupid questions that I would feel too stupid to make a new topic about, so it would be sweet to be able to ask them casually in here. Also just some general feedback on what are good brands, etc.

Good idea!

Edit: To the other Will on the forum ^^

1 inch trimming, so .5 din? :icon_shrug:

:icon_couchhide:

wlorton 10-16-2010 07:07 AM


Originally Posted by RangerG (Post 371225)
Edit: To the other Will on the forum ^^

1 inch trimming, so .5 din? :icon_shrug:

:icon_couchhide:

Lol, Nice... I am going to do a little research on it, as I believe a new member here slipped it in with about 3/8ths off each side and a little fine tuning.....

JShark 10-16-2010 09:14 PM


Originally Posted by wlorton (Post 371273)
1I believe a new member here slipped it in with about 3/8ths off each side and a little fine tuning.....

sissy boy probably sanded it. a real man uses a chainsaw to cut anything and everything. :D im excited to see this. take many pictures.

im gonna fiberglass me up a new box. im thinking of using abs rods for curves around the sub/mdf ring. should i use those bendable wood things instead? (dont know what they are called (ballsa?)) has anyone used either? this will be my first time working with fiberglass. any tips?

zerepdivad 10-16-2010 09:48 PM


Originally Posted by wlorton (Post 371273)
Lol, Nice... I am going to do a little research on it, as I believe a new member here slipped it in with about 3/8ths off each side and a little fine tuning.....

I've done this for customers once or twice. takes a while to make it look nice. but overall isn't horrible. i've done it also on din and a half tahoes as well.

wlorton 10-16-2010 09:53 PM


Originally Posted by zerepdivad (Post 371384)
I've done this for customers once or twice. takes a while to make it look nice. but overall isn't horrible. i've done it also on din and a half tahoes as well.

How much trimming is needed?

MTopper 10-17-2010 04:54 PM

Will...... you need to trim the top and bottom a little bit to get a double din opening like my 04 has. its very little. i'd personally install the radio then trim the bezel after you took some initial measurements.

JShark - what are you asking about regarding the bendi ply/abs?

wlorton 10-17-2010 06:23 PM


Originally Posted by MTopper (Post 371553)
Will...... you need to trim the top and bottom a little bit to get a double din opening like my 04 has. its very little. i'd personally install the radio then trim the bezel after you took some initial measurements.

JShark - what are you asking about regarding the bendi ply/abs?

You run a single din... Wanna trade??????????? ;)

97cherryblazer 10-17-2010 07:30 PM

im getting a 12 inch sub and two 8 inch subs from a friend and i have no idea were to put them in my truck. the two 8 inch subs are in one box and the 12 inch sub is in its own box. so would just right behind the back seats be the best spot? (probably a really stupid question i know)


All times are GMT -5. The time now is 01:56 PM.


© 2021 MH Sub I, LLC dba Internet Brands