My tax money at work (Audio Build)
 

So I got my refund...and then blew it on this..
http://farm6.staticflickr.com/5451/7...b2a88b3919.jpg
Upgrades :)
Not even installed yet. Still have to build a custom sub box to hold the subs and both amps. Much work ahead but if your interested in checking it out I plan on documenting a decent portion of it. The only thing I got to put in was
http://farm6.staticflickr.com/5113/6...012cbaccfa.jpg
Pioneer 80PRS

Audio System:
Head Unit - Pioneer 80PRS
Front - JBL MS52C Component speakers
Rear - JBL GTO938 (3 ways)
Speaker Amp - JBL GTO504EZ
Subs - (2) JBL MS12D4
Sub Amp - JBL GTO7001

Total RMS wattage around 800W give or take

Nice! I like how you kept everything JBL. That Pioneer headunit has had really amazing results. My buddy has the same one and the auto EQ/time alignment really works wonders.

money well spent

I cant wait to use the auto stuff with my new setup. I just cut out the rings for the subs and modified one bracket for the tweeters. A lot more work ahead but ill keep posting.

Nice install on the h/u! Nice and clean, I like, can't wait to see the rest.

Made some progress today. Here is the stock bracket for the dash on the right and what I had to do to make the new tweeter fit on the left.

http://farm8.staticflickr.com/7110/6...af7341dfc0.jpg


Then here is the new tweeter mounted in the bracket.

http://farm6.staticflickr.com/5275/6...01a6acf737.jpg

I can't wait to here what this all sounds like. Sub box construction starts tomorrow! I bought the fleece and resin today. Ill post pictures

Got the box frame done today. Just have to wrap and fiberglass and maybe it will start to look like something. Anyone have any pointers on how to wire the tweeters from the crossover I'm putting in the door? seems impossible to get to the boot bridging the door and cabin.

http://farm8.staticflickr.com/7186/6...ec96ff466a.jpg

More progress
 

So I never knew how much of a pain in the ass it is to get the back panels off in a 2 door blazer. Still got the job done so progress I made yesterday:

- Ran speaker wire from both rear speakers to where amp will be
- Replaced both rear speakers
- Mounted both tweeters and ran wires to crossover
- Ran 3 pairs of dual RCA cables down drivers side (tight squeeze)
- Amp to front crossover wired

Check out some photos

Stock rear speaker magnet vs new
http://farm6.staticflickr.com/5468/6...ac3b712999.jpg
by

Stock rear speaker vs. new
http://farm6.staticflickr.com/5446/6...29f705d9b4.jpg
by

http://farm6.staticflickr.com/5193/6...3bb314d835.jpg

http://farm8.staticflickr.com/7095/6...054fa05aef.jpg


http://farm8.staticflickr.com/7044/7...3a8d260b8b.jpg

Install progress
 

All the speakers are in and wired. I had to build a bracket for the front door. Guess they don't fit 5 1/4 stock. You can see an image of that below. I don't no why my back speakers make a noise with the volume all the way down. It not a hum like power running next to a audio line...gotta troubleshoot that. The sub box frame got wrapped in fleece and I've only gotten to put one coat of resin so far. Still needs about 3 layers of fiberglass. Let me know what you think! And if you have any ideas on what my rear speaker noise could that would be helpful.

http://farm8.staticflickr.com/7222/7...96b80956f6.jpg
Door speaker/bracket

http://farm8.staticflickr.com/7107/6...f0f2acaf5e.jpg
Wrapped frame

http://farm8.staticflickr.com/7216/6...66677ae71e.jpg
1st coat of resin

that box is sick. Its so hard to wrap it without the proper tools a stapler gun wasent doing it. my boy looks like **** compared to yours. i wanna see the finished product