fab boxes are garbage,you should build your own

 

thats what i plan on doing. if you look back a few pages you will see the design

 

your best bet is subs up port out

 

gotta love how people only read the last page and make stupid responses about things that have ALREADY been covered lol.

 

yeah its kinda annoying

 

can you give me an estimate of how many feet of positive and negative wire i will need to do the big 3

Also, on the pdx amp if it is a 1 channel then why is there 2 rca inputs http://www.prohifi.cz/img/large/alpine-pdx-1-1000.jpg

 

oneis input, one is output. There are always a pair of RCAs per channel - left and right signal. Even with mono.

I cant give you a number for the big 3. What you can do is grab a tape measure and pop your hood. I already had a bunch of cable laying around so I didnt need to measure to order.

 

ok, so i will need 3 two channel RCAs from the HU. 2 going to the speaker amps and one going to 1 of the pdx amps. then i will have a short rca going from the preout of the first pdx to the second. Right?

 

Also, how much do you think all of this will weigh. Im wondering if i will need to lift the rear end at all.

 

it will weight a bit. only way to tell if you will need a shackle lift will be to measure the ride height before and after the install.