When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Audio/Video ElectronicsWired up? If you have some sort of A/V modification let's hear about it here. Discussion of stock electrical problems should be done in the 'Lighting & Electrical' section.
I have a 2001 Chevrolet Blazer 4.3 LS right hand drive.
I am currently installing my new head unit. This is a Pioneer FH-S705BT Double DIN.
It was hard to find the right harness for this car here in New Zealand. Because I’m impatience to wait and really want to have the radio going I just cut the connector of the old one of to connect to the new power connector. I have no problem indentifying the normal radio cables. However, there are 4 cables that I can’t identify and don’t know how to install.
These are black/white, brown/white, green/white and a bare cable without insulation. At the moment I don’t have power to the radio, dashboard gauges etc.
Could maybe anyone give me some advice how to connect the wires to the new connector in combination with the gauge wires.
My RPM gauge and dashboard lights don't work at the moment.
Thanks in advance!
Below some photo’s of the old and new connector and type numbers:
New radio connector New radio type numbers Old radio type numbers Old stock radio connector
I have completed the installation with your wire diagram. Thank you for that!
Turned out a fuse was broken and 2 wires were different than I thought in the start.
All sorted now!
12-09-2018, 01:30 AM
Wiring problems new head unit
