I decided to reply over here. Not sure how this forum is about all the chatter in the newb section. :)
Originally Posted by christine_208
(Post 698397)
Nice, It looks like a shinier version of my 99 LT. :)
<PIC REMOVED> After a day in the woods during hunting season.
Originally Posted by Agile
(Post 699138)
Looks great with the new tires. I went cheap on my tires and put on Wranglers. Still have a Miata? I have a 99 10th anniversary edition.
I actually still have 2 Miatas right now - a 91 and a 99. The 91 was a track car but is now mostly stock and for sale. Really hoping to sell it soon. About to slash the price just so I can move on. The 99 is my daily but I'm getting sick of blinding headlights in my rear view. Not sure I could sell it but that might mean a different daily... |
Days like today I wish I didn't work on my own things. Cars are dumb.
I realized after unbolting everything it wasn't going to be possible to get the exhaust out in one piece. I may have been able to finagle some crossmembers down or out and have better luck but I didn't want to. Good thing I have a sawzall. https://farm5.staticflickr.com/4903/...7b4fa0e1_k.jpg The bigger downside to this is cutting the new exhaust in half. Ugh. I grabbed a connector and a couple of U bolt clamps from the parts store. This will be temporary until I take it into an exhaust shop to have it welded back up. I feel sorry for that guy, lol. https://farm5.staticflickr.com/4819/...b09e8451_k.jpg Turns out the ol girl does weep a bit. Probably won't tackle the oil leaks until after winter when I can have it down for a week or 2. https://farm5.staticflickr.com/4838/...c5c51bda_k.jpg But there was one other project while I was under there. Gave the T bars 5 rotations to level things out. Here are my measurements before and after. https://farm5.staticflickr.com/4860/...39b5595b_k.jpg And the aftermath. The money shot. They payoff. My driveway is sloped a bit but the numbers don't lie. Looks much better now. https://farm5.staticflickr.com/4820/...b2135eb5_k.jpg Cheers y'all. I'm tired. Time for a bath followed by a nice steak dinner. |
Looking good!
|
The Manga flow cat for my 2001 ZR2 was a two piece unit. I was able to put it in fairly easily. It came with a clamp so I left it there. Made removing the trans a few months later much easier.
Looks good. |
Originally Posted by 2001ZR2
(Post 699225)
The Manga flow cat for my 2001 ZR2 was a two piece unit. I was able to put it in fairly easily. It came with a clamp so I left it there. Made removing the trans a few months later much easier.
Looks good. Picked up a stupidly large accessory today. This thing is seriously big. https://farm5.staticflickr.com/4834/...32722a38_k.jpg |
Wellllllll... got the ol rig on the rack today and found one really ugly ball joint and a little play in the pitman and idler arms. Dammit! Another $200 to Rock Auto and I should have parts this week. I suppose that's better than having a ****e alignment done today and paying for another a short time down the road.
Also should be welding up my exhaust on Thursday. Hopefully my buddy just does it and doesn't hand it to me to burn a butt-ton of holes in, lol. I've got an SES since the coupler I threw on as a bandaid has a pretty significant leak. And lastly my spacers for the rear should finally come in Friday. Took a few annoyed messages with the vendor to make that happen. The first tracking number stayed in "pre-shipment" status for 2 weeks. The real bummer in all these little issues is that my normal daily (Miata) decided to leak and soak the driver floorboard. I've had a heater and a fan on it all day... https://farm5.staticflickr.com/4807/...f9ea189e_k.jpg |
Oh what a week it has been. My front end parts came in and I took Friday off to work on the truck. Then the wife reminded me we needed to drive it on Saturday. Ugh.
Let a buddy try and weld the exhaust. It's far from pretty but mostly functional. That's a problem for future JR. https://farm5.staticflickr.com/4877/...ab5ffb8f_k.jpg Parts... https://farm5.staticflickr.com/4810/...37f1f2b0_k.jpg Spacers... https://farm5.staticflickr.com/4835/...f9f6c6e0_k.jpg Reason for spacers... https://farm2.staticflickr.com/1938/...d384cb9c_k.jpg YIKES! https://farm2.staticflickr.com/1936/...6ad9aa8c_k.jpg So much better! https://farm2.staticflickr.com/1977/...5659af7a_k.jpg https://farm5.staticflickr.com/4912/...0742900c_k.jpg Wife's work's Christmas party decorations. UGH! https://farm2.staticflickr.com/1942/...c04abfdd_k.jpg On the way home Saturday the SES flashed a few times. That was good for a scare. Ran the codes. Already have a new thermostat on the shelf. Another Rock Auto order and I've got a cap, rotor, plugs, and wires on the way. https://farm5.staticflickr.com/4890/...09769e82_k.jpg https://farm2.staticflickr.com/1929/...55b8eabb_k.jpg I haven't had a chance to run down all the vacuum lines and see why my Service 4WD light comes on when I try to go into 4WD. It was working just fine before. I wonder if I banged something when messing with the exhaust. Time will tell... Until next time... cheers! |
Did you install 4 spacers? I only installed two on the rear, 1.25", to square up the stance. What size(s) did you use?
Also, your comment from before Days like today I wish I didn't work on my own things. Cars are dumb. |
Originally Posted by christine_208
(Post 699502)
Did you install 4 spacers? I only installed two on the rear, 1.25", to square up the stance. What size(s) did you use?
Also, your comment from before made me laugh. I sometimes think being able to work on my own truck is like a curse; knowing I can do it means I can definitely do it for less money (but for the cost of time) and sometimes better than a shop could do it. LOL If I wasn’t such a tightwad I’d probably pay someone to work on things. It’s always dollars and sense. ;) |
So I'm not always good about updating... especially when it's nothing exciting.
Rock Auto order included upper and lower ball joints, inner and outer tie rod ends and sleeves, pitman arm, idler arm, and new CV axles. The axles were cheap enough. 1 had already spewed grease all over many moons ago and the other decided to after cranking the T bars. I bought a couple of new drill bits for operation rivet. That was enough to make me lose my damn mind. https://farm8.staticflickr.com/7897/...2fdbccdd_k.jpg https://farm8.staticflickr.com/7808/...5e4e5269_k.jpg https://farm8.staticflickr.com/7908/...8d6846ea_k.jpg https://farm8.staticflickr.com/7819/...ded3d4e8_k.jpg https://farm8.staticflickr.com/7880/...bee5e3b9_k.jpg https://farm8.staticflickr.com/7922/...5be224fe_k.jpg Presto... like magic. All done. https://farm8.staticflickr.com/7892/...c578e495_k.jpg I greased it all up, gave it a toe and go, and been driving it a little since. Should be getting it aligned next week. The important part... I did the pitman arm in the truck. I know you hear different opinions on whether it's possible or not. I took the 3 bolts to the power steering loose and was able to contort it around to get a socket on it. I was able to make a 32mm work (that's all I had on hand). The nut never came out of the socket until it was reinstalled, lol. Also put a pitman arm puller on it in the truck. It wasn't the easiest, but I'm a fairly decent contortionist. YMMV. After all of this, 4wd still would not engage. I wasn't expecting it to, just hoping for a little luck. I was still getting C0367. I made a post about it and swartlkk came through like he always does. I first replaced the actuator solenoid on the firewall. No change. With the help of a friend, I finally got my TCCM picked up at USPS. MAGIC!!! https://farm8.staticflickr.com/7834/...acb4177f_k.jpg https://farm8.staticflickr.com/7808/...7076c2e9_k.jpg https://farm8.staticflickr.com/7881/...20bd9c82_k.jpg This little light of mine... I'M GONNA LET IT SHINE!!! Too bad I got it fixed AFTER all of this snow. :( https://farm8.staticflickr.com/7804/...d1a8bb53_k.jpg With 2wd, open diff, and not nearly enough ground clearance... I managed to get stuck in my own tiny driveway, lol. https://farm8.staticflickr.com/7870/...d6be037f_k.jpg PS: doggos love snow too... https://farm8.staticflickr.com/7864/...814a29e6_k.jpg |
All times are GMT -5. The time now is 01:44 AM. |
© 2024 MH Sub I, LLC dba Internet Brands