Old new build thread
 

This blazer has been on here before... its back again and getting some more love. I thought the build thread was the correct place for this correct me if I'm wrong. Ok. Here is what has been done to the blazer.
new tires 31 10.5 15
new ecu
new alternator
new battery
new plugs n wires
new shocks
new radiator
new pads and rotors
new axles
aftermarket exhaust
high flow cat
2 in body lift
15 in aftermarket rims
brush guard
surco roof rack
hids
blacked out grill
blacked out side panels
Zr2 front and rear end


https://blazerforum.com/forum/attach...ine=1393644015


https://blazerforum.com/forum/attach...ine=1393644015

https://blazerforum.com/forum/attach...ine=1393644015

bad ass

Thanks man. I have way more invested in this thing than id like. I do hope to keep adding to whats done to it. Although money is a little short.

Hey man nice rig, how hard was it to do the zr2 front and rear end swap?

It was a little pain in the ass to do. It is a straight swap though. Worst part about it was getting the front end high enough to get it out. I imagine if you had access to a lift life would be alot easier. I changed the axles at the same time. You would use the same original axles not ones for a zr2. The zr2 axles are longer and will not work.

its kind of hard to tell by the pics I posted. The rear sticks out of the fender a little more than the front. I would have been cool to have the front the same way. I would recommend if your going to swap yours out to go ahead replace all the worn parts since most of them will be off anyway.