Engine & Transmission Post your Engine and Transmission related problems here.

Blazer 4.3L Bad MPG, Stutter and Hiss sound from dashboard

Thread Tools
 
Search this Thread
 
Old Apr 26, 2013 | 08:58 AM
  #1  
swordfish188's Avatar
Thread Starter
|
Starting Member
Joined: Apr 2013
Posts: 1
swordfish188 is on a distinguished road
Smile Blazer 4.3L Bad MPG, Stutter and Hiss sound from dashboard

I have a Chevy Blazer 99 with a 4.3L Vortec, I had to replace the injectors because one of them was bad. I did it myself. Ever since I Changed them, I hear a sound from the dashboard like a hiss or water rushing. The car was running normal for a few weeks then I started to have misfires , stutter and bad MPG, I took it to my friend and he replace all spark plugs, cables, cap, rotor. Sparks were in a really bad condition with carbon build up. The car was running fine for a few days(still hiss sound from dashboard) . Although no misfire , I do get stutter when idle and some foul smell. Today I put scan to it and I get these codes P0146 02 Sensor no activity detected (Bank 1 Sensor 3) P0174 System too lean P0300 Random/ Multiple Cylinder Misfire. Could it be after putting all together after changing the injector spider I did it wrong? Bad plenum gasket? What could it be?
 
Old Jul 19, 2020 | 02:50 AM
  #2  
Mods's Avatar
Senior Member
Joined: Oct 2019
Posts: 699
From: West-Central Florida
Mods is on a distinguished road
Default

Originally Posted by swordfish188
I have a Chevy Blazer 99 with a 4.3L Vortec, I had to replace the injectors because one of them was bad. I did it myself. Ever since I Changed them, I hear a sound from the dashboard like a hiss or water rushing. The car was running normal for a few weeks then I started to have misfires , stutter and bad MPG, I took it to my friend and he replace all spark plugs, cables, cap, rotor. Sparks were in a really bad condition with carbon build up. The car was running fine for a few days(still hiss sound from dashboard) . Although no misfire , I do get stutter when idle and some foul smell. Today I put scan to it and I get these codes P0146 02 Sensor no activity detected (Bank 1 Sensor 3) P0174 System too lean P0300 Random/ Multiple Cylinder Misfire. Could it be after putting all together after changing the injector spider I did it wrong? Bad plenum gasket? What could it be?
..did you check to see if the O2 sensor was even there, hiss sound and a dead sensor signal...
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
thrandall
Engine & Transmission
1
Dec 6, 2015 09:40 AM
RandyRhoadsFan82
2nd Generation S-series (1995-2005) Tech
5
Nov 14, 2013 10:52 PM
slash3359
Engine & Transmission
2
Jul 18, 2012 05:01 PM
JetJock79
Engine & Transmission
9
Mar 7, 2011 10:32 AM
muleman
2nd Generation S-series (1995-2005) Tech
5
Jan 13, 2008 02:10 PM




All times are GMT -5. The time now is 10:40 PM.