Rough start
#1
Thread Starter
Join Date: Oct 2007
Posts: 2

When I start the the engine, the whole truck shakes really hard but after the start it is fine. HELLLLPPP!!!
#2
BF Veteran
Join Date: May 2005
Location: Central Illinois
Posts: 3,891











Does the shaking go away after you give it gas?
Sounds like it starving for fuel during start up. Turn the key to run, but not start for a second, then turn it too start and see if that makes a difference.
Sounds like it starving for fuel during start up. Turn the key to run, but not start for a second, then turn it too start and see if that makes a difference.
#3
Another idea...Have you checked the motor and transmission mounts to make sure they are not broken?
#4
Thread Starter
Join Date: Oct 2007
Posts: 2

Yeah the it only shakes when I start it then it is fine. I've tried just turning the key on for a second then starting and it acts the same. I will be checking the engine and motor mounts now though. I've thought of that but I thought if it was the mounts it would shake while at high speeds as well.
#5
ORIGINAL: bradgfp0084
...I've thought of that but I thought if it was the mounts it would shake while at high speeds as well.
...I've thought of that but I thought if it was the mounts it would shake while at high speeds as well.
#6
Join Date: Mar 2009
Posts: 6

I know its old, but what was the solution? i'm having the same problem, rough at startup, check engine light comes on; sometimes it smooths out after a few seconds, sometimes longer. thanks!
#7
The CEL is trying to tell you something...
And why would you dig up a 2+ year old thread that has no resolutions posted in it when there are more than a few other threads discussing this topic and similar ones with trouble shooting steps, etc...
And why would you dig up a 2+ year old thread that has no resolutions posted in it when there are more than a few other threads discussing this topic and similar ones with trouble shooting steps, etc...
#8
Join Date: Mar 2009
Posts: 6

because this just happened to be the exact problems that im facing. i saw similar, but not exact problems in other threads. figured it was easier to resurrect and old one as opposed to starting a new one.
any answers?
any answers?
Thread
Thread Starter
Forum
Replies
Last Post
RandyRhoadsFan82
2nd Generation S-series (1995-2005) Tech
9
03-29-2014 11:22 AM
blazerguy22
2nd Generation S-series (1995-2005) Tech
10
11-14-2013 11:50 PM






