SES code P0122 Help- Kyle !!!
#1
11-12-2008 | 12:48 PM
Thread Starter
Joined: Sep 2008
Posts: 156
From:
SES code P0122 Help- Kyle !!!
Guys,
Anyone know why I would this code for throttle/pedal position sensor/switch A circuit low input. I had put a new tps on about 3weeks ago when I got water in mine after I changed it was fine. I cleared the code but now 3weeks later I'm getting this code, what is it, I haven't done anything near it ect.... what could be causing it? Where do I begin.
Anyone know why I would this code for throttle/pedal position sensor/switch A circuit low input. I had put a new tps on about 3weeks ago when I got water in mine after I changed it was fine. I cleared the code but now 3weeks later I'm getting this code, what is it, I haven't done anything near it ect.... what could be causing it? Where do I begin.
#2
11-12-2008 | 01:04 PM
RE: SES code P0122 Help
Check out THIS THREAD. Or THIS ONE more recently (even links to the DIY article for this code).
Thread
Thread Starter
Forum
Replies
Last Post
GregB23
2nd Generation S-series (1995-2005) Tech
9
10-06-2014 10:25 PM
