1994 Blazer K1500 Silverado (2-door) NEED Seatbelts
 

Hi, I need to replace the front passenger seatbelt complete mechanism and the back right rear seatbelt buckle assembly. I am having a hard time finding any parts from a pick & pull or Ebay. I found one set on Ebay for a 1994 but it didn't fit. My mechanic says that they were for the 4 door Blazer version (I guess that's the S10).

Does anyone know where I can get these seatbelt parts, either used or are aftermarket replacement parts available?

Thanks for your help

Joe

I know in my area wrecking yards are not allowed to sell and safety items: seat belts, airbags etc.
That being said I'm scrapping a 1995 4 door Tahoe that I can pull the belts from, they are grey and a little dirty.

Hey thanks for the offer. I might take you up on that. Do you know if it's the same seatbelt mechanism as in the 2 door full size Blazer?

You make a good point about reselling safety items. In that case, where does one get new aftermarket seatbelts for old cars?

Thanks,
Joe

I'll look at my 1992 2 door and see if they're the same

da67goatman Thanks so much! I appreciate that. For people that do restore these, where do they get seatbelts etc that are new?

I've bought from seatbeltsplus.com a couple of times, and they were pretty good.

Thanks for the info. I inquired on their website about my Blazer. Still waiting for a reply.

So the 2 door and 4 door front seat belts are the same. The rear however are totally different. The 4 door upper seat belt mounts to the pillar next to the seat back. The 2 door mounts at the roof-line through the headliner.

That's great news about the front seat belts. For the rear, I don't need the seatbelt mechanism, I need the buckle assembly that mounts to the floor behind the rear seats.

Let me know what you'd want for the front passenger and the rear seatbelt buckle.

Thanks!

Now I understand. Which buckle do you need for the rear?

The buckle for the left rear passenger seat (behind the driver).

I really appreciate all of your help.

Thanks,
Joe

One my 4 door, the rear buckle is integrated into the seat bottom, so i can't remove that one.

Okay, thanks for letting me know. How much do you want for the front passenger (left) seat belt assembly?

Also, I'm still waiting on seatbeltsplus.com to give me info back. I completed their online form, but no response yet.

Thanks,
Joe

da67goatman Are you willing to sell your front passenger seatbelt assembly? Would you be able to send me a few pictures, just so I can be sure it would fit my 94?

Thanks,
Joe

Here are all the seatbelt parts except the driver's. Let me know what all you want and we'll strike a deal.
https://cimg1.ibsrv.net/gimg/blazerf...f82ab15002.jpg
Pass front lower
https://cimg6.ibsrv.net/gimg/blazerf...fcaffec58a.jpg
pass front upper
https://cimg0.ibsrv.net/gimg/blazerf...bbd1a7ffb7.jpg
rear center
https://cimg8.ibsrv.net/gimg/blazerf...69cd73377b.jpg
rear pass bottom

Your front seatbelt looks different than mine.

https://cimg0.ibsrv.net/gimg/blazerf...bf4048737d.jpg
https://cimg1.ibsrv.net/gimg/blazerf...097c9e79b7.jpg
https://cimg2.ibsrv.net/gimg/blazerf...44eb404bcc.jpg
https://cimg3.ibsrv.net/gimg/blazerf...090a457ca6.jpg

So apparently they restyled the interior around 95-96 and you have the early style. Where my Tahoe is the later style adjustable height. I don't know if the newer will go into the older style.