4x to 2x hangin' up ??
 

Hi Blazer Guys,
Well, here we go again...
'98 2 dr/4x4 4.3/auto
New crate motor, and almost everything attached to it (all 'stock')
Just had the M/C replaced due to failure. Got the truck back and having
issues with the front drive draggin' on the right side. Doesn't seem to pull
out of 4x4 all the way. I had the issue when the 'previous' engine was installed by a shady shop in NM(long story). No problems for the last 5 mnths until now (since the crate was installed)
Is this a common problem with the electronic 4wd switching on these things (I do not use it ever - I live in LA!)
Second issue: anyone know of a competant mechanic for these things in the South West Los Angeles area (LAX or south).
Thanks for your time,
Gerry