G80 locker
 

ok I was talking a guy on this site looking for a G80 locker a short time ago, i forgot who it was, but i have one if your still interested....
sorry for not remembering who, but the 'ol brain aint what it used to be

Wish i was near you I would buy it.

nothing that the good ol UPS guy cant fix!!!

HA HA as much as that axle weighs shipping cost would be horrendus:icon_screwy:

I love mine <3

true. but couldnt you just have the locker shipped and not the whole axle?? just my .02

I wish I could have my old G80 in the Cobalt, being open really sucks, even in a car.

I could but I dont know if it swap into an open rearend housing.Even if it did I have to set up the backlash and pinion depth and all that.Then I would probaly have to have the axles also cause Im sure on how splines are on it.Could be 28 or 30 in mine and just the oppsite on the G80

1sttime, the g80 came from a 7.6" rear so splines are probibly the same,
but yes to the set-up, the axle housing i have is going to the scrap yard
you could just buy the axles and g80, then just have some one install for u

Notsure what you mean by a 7.6 rear?Mine is 8.5 10 bolt corporate housing.Came out of 95 z71.Even if yours was the right size by the time I gave you your asking price plus shipping I couldnt justify the cost.As of right now Im going with the Carrier assembly and pinion gear and transfering it into my housing.Im going into uncharted territory but I have an expurt thats nursing me thrugh this setup so i should be ok.I would have just swapped the complete axle housing and all but its in bad shape.The bottom of it sat in mud for over a year and I took off probaly 7/16 worth of scale rust cleaning it up.I got it all ground nice and smooth then fabbed a piece of 3/8s plate to weld on it.Im going to use than for another setup later down the road.So anyway My truck will have 3.42 gear ratio would should be alot better than the 3.08`s especialy since most of my driving is intown.