My husband just replaced the transmission. Got everything back together went in to start car and pressed brake and car acted as if it were going to turn on without key in ignition. We know that a wire has gotten connected incorrectly but can't figure out the problem. Anyone have ideas what went wrong?

 

Can you provide a bit more details. Make, model, year, door count, 4x4 or 2x4. Thanks

 

01 blazer 4x4 4-door automatic. not a trailblazer

 

i do these transmissions all the time. there really is no way to reconnect a plug into the wrong place, they make them all different shapes to prevent people from doing so. theres always a chance of some wires getting smashed together or something like that

so you hit the brake and the lights light up on the dash or the starter cranks?

 

great i have a great question what if your brake lights stay on where would you go first ok i replaced my brake switch my multifunction switch and if i take out my lt tun fuse and the rt turn fuse they go out any help would be great oh and its a 2000 chevy blazer 4 door when i push my brake the fuel pump turns on thank in advance

 

How do you know that the fuel pump turns on when you press the brake pedal? Is this with key on or key off?

Have you ever had a leaking windshield or chronically wet carpet?


George

 

You might want to check the date on this one, George.

 

I thought post #5 was a new problem attached to an old thread. Maybe your right.

George

 

Then that person might want to check the date, lol.

 

Zombies.